 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| THICK FILM CONVEX CHIP ARRAYS RESISTORS CAPACITORS COILS DELAY LINES SMN SERIES Resistor Arrays ZMN SERIES Jumper Arrays Internationally popular convex termination pads Industry's widest selection and lowest cost! 1 to 10M, 0.5% to 5%, 8 sizes, 3 circuit schematics 2 to 9 resistors per array reduces mounting costs ZMN Series zero ohm jumpers are 1Amp, 50m max Scalloped edge design available RoHS Term.W is RoHS compliant & 260C compatible RCD's Series SMN resistor and ZMN jumper chip arrays not only enable significant pcb space savings, but a sizeable cost savings over the use of individual components. The savings in assembly cost, by placing a single chip instead of multiple chips, more than pays for the cost of these components. SMN/ZMN feature convex terminations, concave avaliable (see CN Series). P T -- W -- L H 4 PIN: SMN0404, SMN0606 10 PIN: SMN2010, SMNN1206 (SMNN1206 avial. in Config. D only) W ----- T 1 Config. A P L H 1 Config. A -- 1 Config. B 1 Config. D 8 PIN: SMN0804, SMN1206, SMN2012 W ---- 16 PIN: SMN1506 L W T P L L .01 [.25] .039 [1] .063 [1.6] .079 [2] .126 [3.2] .126 [3.2] .154 [3.9] .200 [5.08] .200 [5.08] .200 [5.08] .200 [5.08] T P L RCD Type SMN0404 SMN0606 SMN0804 SMN1206 SMNN1206 SMN1506 SMN2010 SMN2010 SMN2012 SMN2012 --- H Rated Pow er* 62mW 62mW 62mW 62mW 31mW 62mW*** 100mW 55mW 125mW 62mW 1 Config. A Working Voltage 25V 50V 25V 50V 25V 25V 50V 50V 50V 50V 1 Config. B H 1 Config. A H.006 [.15] .016 [.4] .022 [.55] .016 [.4] .022 [.55] .022 [.55] .018 [.45] .024 [.6] .024 [.6] .024[ .6] .024 [.6] T typ. .010 [.25] .012 [.3] .010 [.25] .010 [.25] .010 [.25] .012 [.3] .010 [.25] .010 [.25] .012 [.30] .012 [.30] Config A A A A D A A B A B** TC (ppm/C) 250ppm 200ppm 250ppm 200ppm 200ppm 200ppm 200ppm 200ppm 200ppm 200ppm Res. Range Res. Range Res. Range 0.5% Tol 1% Tol 2 & 5% Tol ** ** 10 - 1M ** ** 1 - 10M ** ** 10 - 1M 22-470K 1 - 10M 1 - 10M ** ** 10 - 1M ** ** 10 - 1M ** ** 10 - 1M ** ** 10 - 1M ** 22 - 1M 10 - 1M ** ** 10 - 1M W.008 [.2] .039 [1] .063 [1.6] .039 [1] .063 [1.6] .063 [1.6] .063 [1.6] .100 [2.54] .100 [2.54] .122 [3.10] .122 [3.10] P.008 [.2] .025 [.65] .0315 [.8] .02 [.5] .0315 [.8] .025 [.64] .02 [.5] .040 [1.0] .040 [1.0] .050 [1.27] .050 [1.27] * Rated power is per resistor element at 70C ** Consult factory for availability *** SMN1506 package power rating is .25W DERATING 75 50 25 0 25 50 ----------- % OF 70C RATING 100 SUGGESTED PAD LAYOUT C 75 100 125 150 175 200 70 AMBIENT TEMPERATURE (C) A B TYPICAL PERFORMANCE CHARACTERISTICS Operating Temp. Range Short time Overload (2.5X rated W, 5 sec) Resistance to Solder Heat (260C, 10 sec) Moisture Res. (90-95% RH, 40C,100 hrs) High Temp. Exposure (125C, 100 hrs) Load Life (1000 hrs at rated W) Insulation Resistance Dielectric Withstanding Voltage -55C to +150C 2%+0.1 max. 1%+0.1 max. 3%+0.1 max. 1%+0.1 max. 3%+0.1 max. 10,000 Megohm 400V P/N DESIGNATION: RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com FA075A Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 321 321 321 321 321 21 21 21 21 21 D RCD Type SMN0404 (4-pin) SMN0606 (4-pin) SMN0804 (8-pin) SMN1206 (8-pin) SMNN1206 (10-pin) SMN1506 (16-pin) SMN2010 (10-pin) S MN2012 (8-pin) A .014 [.36] .016 [.4] .012 [.3] .018 [.45] .014 [.36] .012 [.3] .022 [.55] .032 [.82] B C D .011 [.28] .020 [.5] .020 [.5] .016 [.4] .032 [.8] .036 [.9] .008 [.2] .020 [.5] .020 [.5] .014 [.36] .032 [.8] .036 [.9] .011 [.28] .032 [.8] .036 [.9] .008 [.2] .032 [.8] .039 [1] .018 [.45] .040 [1] .060[1.5] .018 [.45] .045 [1.1] .080 [2] Type (SMN, SMNN or ZMN) Chip Size Circuit Configuration: A, B, D Resis.Code 1%: 3 signif. figures & multiplier, e.g. 1R00=1, 10R0=10, 1000=100, 1001=1K, etc. Resis.Code 2%-5%: 2 signif. figures & multiplier, e.g. 1R0=1, 100=10, 101=100, 102=1K, etc. Leave blank on ZMN zero-ohm jumper arrays (.05 max) Tolerance Code: J=5%(std), G=2%, F=1%, D=0.5% Leave blank on ZMN zero-ohm jumper arrays Packaging: B = Bulk, T = Tape & Reel Termination: W= Lead-free (standard), Q= Tin/Lead (leave blank if either is acceptable) 321 321 321 321 321 321 321 321 321 321 321 321 321 321 321 321 321 321 321 321 321 321 321 321 321 21 21 21 21 21 321 321 321 321 321 321 321 321 321 321 SMN 2010 A - 102 - J T W 32 |
Price & Availability of ZMN2010A-100-D
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |